Work Procedure

ADDITIONAL SERVICE WHEN REPLACING ECM


Work Procedure

1.PERFORM INITIALIZATION OF NVIS (NATS) SYSTEM AND REGISTRATION OF ALL NVIS (NATS) IGNITION KEY IDS
Work Procedure.
- GO TO 2.
2.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Work Procedure.
- GO TO 3.
3.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Work Procedure.
- GO TO 4.
4.PERFORM IDLE AIR VOLUME LEARNING
Work Procedure.
- GO TO 5.
5.PERFORM G SENSOR CALIBRATION
Work Procedure.
- END