Work Procedure

G SENSOR CALIBRATION


Work Procedure

1.PREPARATION BEFORE CALIBRATION PROCEDURE
1. Park the vehicle on a level surface.
2. Adjust air pressure of all tires to the specified pressure. [1][2]Specifications.
- GO TO 2.
2.PERFORM CALIBRATION
With CONSULT-III
1. Turn ignition switch ON.

CAUTION:
Never start engine.
2. Select "Work Support" mode in "ENGINE.
3. Select "G SENSOR CALIBRATION".
4. Touch "Start".

CAUTION:
Never swing the vehicle during "G sensor calibration".
Is "COMPLETED" displayed?
YES - END
NO - Perform steps 1 and 2 again.