Cruise Test

ROAD TEST


Cruise Test

1.CHECK VEHICLE SPEED WHEN SHIFTING GEARS -- PART 1
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.






2. Park vehicle on flat surface.
3. Move selector lever to "P" position.
4. Start engine.
5. Move selector lever to "D" position.





6. Accelerate vehicle to 2/8-way throttle depressing accelerator pedal constantly.
Read vehicle speed and engine speed. General Specification Shift Characteristics Stall Speed Pressure, Vacuum and Temperature Specifications, "Shift Characteristics".
OK or NG
OK - GO TO 2.
NG - Symptom Related Diagnostic Procedures. Continue "Road
Test".
2.CHECK VEHICLE SPEED WHEN SHIFTING GEARS -- PART 2
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.





3. Accelerate vehicle to full depression depressing accelerator pedal constantly.
Read vehicle speed and engine speed. General Specification Shift Characteristics Stall Speed Pressure, Vacuum and Temperature Specifications, "Shift Characteristics".
OK or NG
OK - GO TO 3.
NG - Symptom Related Diagnostic Procedures. Continue "Road
Test".
3.CHECK MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES - GO TO 4.
NO - Symptom Related Diagnostic Procedures. Continue "Road Test".
4.CHECK SHIFT-UP FUNCTION
During manual mode driving, is upshift from M1 to M2 to M3 to M4 to M5 to M6 performed?
Read the gear position. CONSULT-III Function (Transmission).
Is upshifting correctly performed?
YES - GO TO 5.
NO - Symptom Related Diagnostic Procedures. Continue "Road Test".
5.CHECK SHIFT-DOWN FUNCTION
During manual mode driving, is downshift from M6 to M5 to M4 to M3 toM2 to M1 performed?
Read the gear position. CONSULT-III Function (Transmission).
Is downshifting correctly performed?
YES - GO TO 6.
NO - Symptom Related Diagnostic Procedures. Continue "Road Test".
6.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES - 1. Stop the vehicle.
2. Perform self-diagnosis. CONSULT-III Function (Transmission).
NO - Symptom Related Diagnostic Procedures. Then continue trouble diagnosis.