Description

CONFIGURATION (BCM)


Description

Vehicle specification needs to be written with CONSULT-III because it is not written after replacing BCM.
Configuration has three functions as follows.






CAUTION:
- When replacing BCM, you must perform "WRITE CONFIGURATION" with CONSULT-III.
- Complete the procedure of "WRITE CONFIGURATION" in order.
- If you set incorrect "WRITE CONFIGURATION", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "WRITE CONFIGURATION" when performing operations other than the below.
- Replacing with new BCM
- Changing "SECURITY ALARM SET(SIREN)" of work support from ON to OFF*

NOTE:
*: Perform configuration in "WRITE CONFIGURATION - Manual selection" after performing this work support.