Removal And Installation

ELECTRIC CONTROLLED COUPLING OIL SEAL


Removal and Installation


REMOVAL
1. Remove rear drive shafts. .





2. Remove electric controlled coupling oil seal from electric controlled coupling, using the suitable oil seal remover.

CAUTION:
Never damage electric controlled coupling.

INSTALLATION





1. Using the drift (A) [SST: KV38109700 ( -- )], install electric controlled coupling oil seal to electric controlled coupling to electric controlled coupling all the way until SST contact the end.

NOTE:
The use of SST satisfies the mounting dimensions.

CAUTION:
- Always use SST [KV38109700 ( -- )].
- Never reuse oil seal.
- When installing, never incline oil seal.
- Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of oil seal.
2. Install rear drive shafts. .

CAUTION:
Never damage electric controlled coupling oil seal.