CONSULT-III Function (Transmission)

DIAGNOSIS SYSTEM (TCM)


CONSULT-III Function (TRANSMISSION)

CONSULT-III can display each diagnostic item using the diagnostic test modes shown below.

FUNCTION





*: "Function Test" can be selected, but do not use it.

SELF-DIAGNOSTIC RESULT MODE
Testing and Inspection.

DATA MONITOR MODE

Display Items List





















WORK SUPPORT MODE

Display Item List






Engine Brake Adjustment






CAUTION:
Mode of "+1""0""-1""-2""OFF" can be selected by pressing the "UP""DOWN" on CONSULT-III screen.
However, do not select mode other than "0" and "OFF". If the "+1" or "-1" or "�2" is selected, that might cause the irregular driveability.

Check CVT Fluid Deterioration Date






CAUTION:
Touch "CLEAR" after changing CVT fluid, and then erase "CVTF DETERIORATION DATE".