Power Supply And Ground Circuit

POWER SUPPLY AND GROUND CIRCUIT:_:REAR POWER WINDOW SWITCH





Diagnosis Procedure
1.CHECK REAR POWER WINDOW SWITCH POWER SUPPLY
1. Turn ignition switch OFF.
2. Disconnect rear power window switch connector.
3. Turn ignition switch ON.
4. Check voltage between rear power window switch harness connector and ground.





Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK REAR POWER WINDOW SWITCH POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connector.
3. Check continuity between BCM harness connector and rear power window switch harness connector.





4. Check continuity between BCM harness connector and ground.





(): Without Intelligent Key
Is the inspection result normal?
YES - Replace BCM. Removal And Installation With Intelligent Key System (with Intelligent Key) or Removal And Installation, "Removal and Installation" (without Intelligent Key).
NO - Repair or replace harness.