Sedan

REAR SEAT

Disassembly and Assembly

60:40 SPLIT FOLD DOWN SEAT - SEDAN

Disassembly of Armrest





1. Fold down the armrest and remove the armrest bolt cover (A).






2. Remove the armrest bolt (A).






3. Push the armrest toward left side while pulling backward to remove.






4. Remove the rear seat bushing, and then remove the armrest hinge cover by pulling it backward.

Assembly of Armrest
Assembly is in the reverse order of disassembly.

Disassembly of Seatback Trim and Pad

1. Remove the headrest.





2. Remove the retainer under the back of seatback.





3. Remove the clips, and then remove the striker cover.






4. Remove the headrest holder.
5. To remove armrest, refer to "Disassembly of Armrest".
6. Remove the seatback trim.





7. Remove the bolts, and then remove the rear seat lock assembly.
8. Remove the seatback pad from the seatback frame.
9. Remove the seatback center bracket bolt and then remove the seatback frame.

Assembly of Seatback Trim and Pad
Assembly is in the reverse order of disassembly.
- Before installing headrest holder, check its orientation (front/rear and right/left).

Disassembly of Seat Cushion Trim and Pad
Remove the rings to separate the trim and pad.

Assembly of Seat Cushion Trim and Pad
Assembly is in the reverse order of disassembly.