Turn Signals Do Not Operate

TURN SIGNAL AND HAZARD WARNING LAMPS


Turn Signals Do Not Operate

1.CHECK COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INPUT SIGNAL
With CONSULT-III
1. Select "BCM" on CONSULT-III. Select "FLASHER" on "SELECT TEST ITEM" screen.
2. Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "TURN SIGNAL R" and "TURN SIGNAL L" turns ON-OFF linked with operation of lighting switch.





Without CONSULT-III
Combination Switch Inspection .
OK or NG
OK - Replace the BCM. Service and Repair
NG - Check combination switch (lighting and turn signal switch). Combination Switch Inspection .