Vehicle Does Not Creep Backward In "R" Position

TROUBLE DIAGNOSIS FOR SYMPTOMS


Vehicle Does Not Creep Backward in "R" Position


SYMPTOM:
Vehicle does not creep backward when selecting "R" position.

DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. CVT RE0F08B.
Is any malfunction detected by self-diagnosis
YES - Check the malfunctioning system. CVT RE0F08B.
NO - GO TO 2.
2.CHECK CVT POSITION
Check CVT position. Testing and Inspection
OK or NG
OK - GO TO 3.
NG - Adjust CVT position. Adjustments.
3.CHECK CVT FLUID LEVEL
Check CVT fluid level. Checking CVT Fluid.
OK or NG
OK - GO TO 4.
NG - Refill CVT fluid.
4.CHECK LINE PRESSURE
Check line pressure at idle. CVT RE0F08B.
OK or NG
OK - GO TO 5.
NG - Check the malfunctioning item. CVT RE0F08B.
5.CHECK STALL REVOLUTION
Check stall revolution. CVT RE0F08B.
OK or NG
OK - GO TO 6.
NG - Check the malfunctioning item. CVT RE0F08B.
6.CHECK SYMPTOM
Check again. CVT RE0F08B.
OK or NG
OK - INSPECTION END
NG - GO TO 7.
7.CHECK TCM
1. Check TCM input/output signals. CVT RE0F08B.
2. If NG, re-check TCM pin terminals for damage or loose connection with harness connector.
OK or NG
OK - Replace the transaxle assembly. Transaxle Assembly.
NG - Repair or replace damaged parts.