"Air Bag" Warning Lamp Does Not Turn OFF

TROUBLE DIAGNOSIS


Trouble Diagnosis: "AIR BAG" Warning Lamp Does Not Turn Off


DIAGNOSTIC PROCEDURE 7
1.CHECK CONDITION OF AIR BAG MODULE
Inspect for any deployed air bag modules or seat belt pre-tensioners.
Are any air bag modules or seat belt pre-tensioners deployed?
Yes - For Frontal Collision or For Side and Rollover Collision.
No - GO TO 2.
2.CHECK THE AIR BAG FUSE
Check 10A fuse [No. 1, located in the fuse block (J/B)]. Schematic.
OK or NG
OK - GO TO 4.
NG - GO TO 3.
3.CHECK AIR BAG FUSE AGAIN
Replace 10A fuse [No. 1, located in the fuse block (J/B)] and turn ignition switch ON.
Does the fuse blow again?
Yes - Repair harness.
No - Inspection End.
4.CHECK AIR BAG DIAGNOSIS SENSOR UNIT
Connect CONSULT-III and touch "START".
Is "AIR BAG" displayed on CONSULT-III?
Yes - GO TO 5.
No - Visually inspect the air bag diagnosis sensor unit harness connections. If the connections are OK, replace the air bag diagnosis sensor unit. Service and Repair.
5.CHECK HARNESS CONNECTION
Check for loose connections between the combination meter and the air bag diagnosis sensor unit.
OK or NG
OK - Replace air bag diagnosis sensor unit. Service and Repair.
NG - Properly connect the combination meter and air bag diagnosis sensor unit harness connectors. If "AIR BAG" warning lamp still does not turn off, replace the wiring harness.