Map Light: Service and Repair

INTERIOR LAMP


Map Lamp


BULB REPLACEMENT





1. Remove the map lamp lens (1).
2. Remove the bulb from lamp.

NOTE:
Pull bulb end from Y-shaped connector first to remove.
3. Installation is in the reverse order of removal.
- Install the map lamp lens (1) so the round lens is positioned to the front of the vehicle as shown. There is a tab on the lens to prevent incorrect installation of the lens.

REMOVAL AND INSTALLATION

Removal





1. Insert a suitable tool and disengage the pawl (A) fittings from the map lamp (1).
2. Disconnect map lamp connector and remove map lamp (1).

Installation
Installation is in the reverse order of removal.

DISASSEMBLY AND ASSEMBLY

Disassembly





1. Remove screw (A).
2. Remove sunroof switch (1).

Assembly
Assembly is in the reverse order of disassembly.