Procedures

DRIVE BELTS

Component














DRIVE BELTS


Checking Drive Belts


WARNING:
Be sure to perform this step when the engine is stopped.

NOTE:
On vehicles not equipped with A/C, there is an idler pulley in the position for the drive belt routing.
- Make sure that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use range.

NOTE:
- Check the drive belt auto-tensioner indication when the engine is cold.
- When new drive belt is installed, the indicator (notch on fixed side) should be within the range.
- Visually check entire drive belt for wear, damage or cracks.
- If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.