Changing

A/T FLUID


Changing A/T Fluid

1. Warm up A/T fluid.
2. Stop engine.
3. Drain A/T fluid by removing the drain plug. Reinstall the drain plug to the specified torque.

CAUTION:
Do not reuse drain plug gasket.






4. Refill the transaxle with new specified A/T fluid through the A/T fluid charging pipe. Always refill the transaxle with the same volume of A/T fluid that was drained out.






5. Run engine at idle speed for 5 minutes.
6. Check A/T fluid level and condition. Checking A/T Fluid.