High-Pressure Pipe

REFRIGERANT LINES


Removal and Installation of High-Pressure Pipe












REMOVAL
1. Remove low-pressure flexible hose. Low-Pressure Flexible Hose.
2. Remove high-pressure pipe from the clips.





3. Remove high-pressure pipe bolt (A), and then remove high-pressure pipe (1) from condenser (2).

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace O-rings of high-pressure pipe with a new ones, and apply compressor oil when installing.
- When recharging refrigerant, check for leaks.