Removal And Installation

AIR BREATHER HOSE


Removal and Installation


REMOVAL
1. Remove the battery. Removal and Replacement.
2. Remove the air duct and air cleaner case. .
3. Remove air breather hose.

CAUTION:
When air breather hose is removed, be sure to hold two way connector securely.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Make sure air breather hose is not collapsed or blocked due to folding or bending when installed.
- When installing air breather hose on two way connector, aim paint mark toward the vehicle rear.
- When installing air breather hose on two way connector, push it until it hits the transaxle case.
- When installing air breather hose to air duct and air cleaner case, make sure that clips are fully inserted.