Nismo 370Z
FRONT BUMPER ASSEMBLY
Removal and Installation
CAUTION:
- Front bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil.
REMOVAL
1.Fully open the hood assembly.
2.Remove the front under cover.
3.Remove the tapping screws from the left and right of the front bumper fascia.
4.Remove the clips from the top of front bumper fascia and then remove the front bumper fascia assembly.
5.Remove the rivets from protector-food control cable left and right.
6.Remove the rivets from extension-seal, condenser left and right.
CAUTION:
- Two people shall perform the work to remove the Front bumper fascia so that it is not dropped.
INSTALLATION
Installation is the reverse order of removal.
- Check the clearance when installing the Front bumper fascia assembly.