Removal And Installation

SOFT TOP

REAR LOCK STRIKER : Removal and Installation


REMOVAL






1.Operate soft top as shown in the figure.

CAUTION:
Storage lid assembly may close due to low oil pressure.
Always support storage lid assembly in the fully open position using a supporting block.
2.Lift up soft top cover inner (1) from passenger room and remove soft top cover inner clips (2).










3.Remove rear lock striker mounting bolts (3) from the service hole, and then remove rear lock striker.

CAUTION:
Be careful not to damage storage lid during the operation.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
After installation, check soft top open/close lock/unlock operation.