Removal And Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove reservoir tank. Exploded View.
2.Disconnect crash zone sensor harness clips from fan shroud, and move harness to aside.
3.Disconnect harness connector from cooling fan control module, and move harness to aside.
4.Remove under cover.
5.Disconnect A/T fluid cooler hose from fan shroud. (A/T models)
6.Remove cooling fan assembly from under the vehicle.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent core support from being damaged).