Overhaul

FRONT COMBINATION LAMP

Disassembly and Assembly


DISASSEMBLY

1.Rotate the resin cap counterclockwise and unlock it.
2.Rotate the xenon bulb socket counterclockwise and unlock it.
3.Remove the retaining spring lock. Remove the xenon bulb.
4.Remove the bumper bracket.
5.Remove the HID control unit installation screw.
6.Remove the screw. Disconnect the connector from HID control unit.
7.Pull out the xenon bulb socket from the headlamp housing assembly.
8.Rotate the parking lamp bulb socket counterclockwise and unlock it.
9.Remove the bulb from the parking lamp bulb socket.
10.Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.
11.Remove the bulb from the front turn signal lamp bulb socket.

ASSEMBLY

Assemble in the reverse order of disassembly.

CAUTION:





- When xenon bulb socket installation, fix xenon bulb socket harness (A) to a protruding portion (B) in a headlamp housing surely.
- Install HID control unit securely.
- After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
- Seal packing cannot be reused.
- After installation, check that headlamp lighting. Inspection After Installation (HID Control Unit).