Removal And Installation

FRONT COMBINATION LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove the front bumper fascia. Exploded View.
2.Remove the headlamp mounting bolts and clip.
3.Remove the holding clip (A)* and harness clip.





*: Left side only
4.Pull out the headlamp assembly forward the vehicle.
5.Disconnect the connector before removing the headlamp housing assembly.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- After installation, perform aiming adjustment. Description.
- After installation, check that headlamp lighting. Inspection After Installation (HID Control Unit).