Without Intelligent Key System

HOOD

HOOD ASSEMBLY : Removal and Installation


CAUTION:
- Operate with two workers, because of its heavy weight.
- Use protective tape or shop cloth to protect from damage during removal and installation.

REMOVAL

1.Support hood assembly with the proper material to prevent it from falling.

WARNING:
Injury may occur if hood assembly is not supported by the proper material when removing hood assembly.
2.Remove hood hinge mounting nuts on the hood to remove the hood assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- After installation, apply touch-up paint (the body color) onto the heads of hood hinge mounting bolts and nuts.
- After installing, perform hood fitting adjustment. Without Intelligent Key System.