Seatback Striker

REAR SEAT

SEATBACK STRIKER : Removal and Installation


REMOVAL

1.Remove seatback LH and RH from the vehicle.
Seatback.
2.Remove seat cushion from the vehicle.
Seat Cushion.
3.Remove side hinge from the vehicle.
Seatback Hinge.
4.Remove luggage side lower finisher from the vehicle.
Luggage Side Lower Finisher.
5.Remove outer anchor mounting anchor bolt, and then remove outer anchor.
6.Remove mounting bolts or nuts of striker, and then remove striker from the vehicle.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
When installing striker, tighten mounting bolts or nuts to the specified torque according to the numerical order as shown in the figure.





1.Temporarily tighten mounting bolts in numerical order (1 and 2 as shown in the figure).
2.Tighten mounting bolts or nuts to the specified torque in numerical order (3, 4, and 5 as shown in the figure).
For the specified torque, Exploded View.

White arrow indicates : Vehicle front