Removal And Installation

REAR COMBINATION LAMP

Removal and Installation


CAUTION:
- Disconnect the battery negative terminal or the fuse.
- When removing, always use a remover tool that is made of plastic.

REMOVAL

1.Full open back door.
2.Remove luggage side lower finisher. Luggage Side Lower Finisher.
3.Remove rear combination lamp mounting bolts.
4.Insert a remover tool into the rear combination lamp rear fender to disengage the clips.
5.Pull up rear combination lamp, and then remove rear combination lamp.
6.Disconnect rear combination lamp connector.

INSTALLATION

Install in the reverse order of removal.