Removal And Installation

ELECTRIC CONTROLLED COUPLING OIL SEAL

Removal and Installation


REMOVAL

1.Remove rear drive shafts. .





2.Remove electric controlled coupling oil seal from electric controlled coupling, using the suitable oil seal remover.

CAUTION:
Never damage electric controlled coupling.

INSTALLATION






1.Using the drift (A) [SST: KV-38109700 (-)], install electric controlled coupling oil seal to electric controlled coupling to electric controlled coupling all the way until SST contact the end.
NOTE:
The use of SST satisfies the mounting dimensions.

CAUTION:
- Always use SST [KV-38109700 (-)].
- Never reuse oil seal.
- When installing, never incline oil seal.
- Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of oil seal.
2.Install rear drive shafts. .

CAUTION:
Never damage electric controlled coupling oil seal.