Power Trunk / Liftgate Lock Actuator: Service and Repair

BACK DOOR LOCK

Removal and Installation


BACK DOOR LOCK

Removal
1.Remove the back door finisher lower.
2.Remove the bolts, disconnect the electrical connector and separate the lock from the door.





Installation
Installation is in the reverse order of removal.

BACK DOOR HANDLE

Removal
1.Remove the back door finisher lower.
2.Disconnect the harness connectors (1), remove the nuts and the back door handle (A).





3.Release the clips and remove the switch from the housing.





Installation
Installation is in the reverse order of removal.