Turn Signals Do Not Operate

TURN SIGNAL AND HAZARD WARNING LAMPS

Turn Signals Do Not Operate


1. CHECK COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INPUT SIGNAL

With CONSULT
1.Select "BCM" on CONSULT. Select "FLASHER" on "SELECT TEST ITEM" screen.
2.Select "DATA MONITOR" on "SELECT DIAG MODE" screen. Make sure that "TURN SIGNAL R" and
"TURN SIGNAL L" turns ON-OFF linked with operation of lighting switch.
When turn signal switch is right position : TURN SIGNAL R ON
When turn signal switch is left position: TURN SIGNAL L ON

Without CONSULT
Combination Switch Inspection .
OK or NG
OK- Replace the BCM. Service and Repair
NG- Check combination switch (lighting and turn signal switch). Combination Switch Inspection .