Rear Wheel Hub

WHEEL HUB

Removal and Installation


COMPONENTS












REMOVAL

1.Remove wheel and tire using power tool.
2.Remove wheel sensor from wheel hub and bearing assembly.

CAUTION:
Do not pull on wheel sensor harness.
3.Remove the brake drum only. Removal And Installation.
4.Remove wheel hub and bearing assembly bolts, and then remove wheel hub and bearing assembly from vehicle.
5.Suspend back plate with suitable wire, or if necessary, remove back plate using the following procedure.
1.Remove parking brake rear cable from back plate. Removal and Installation.
2.Separate brake tube from wheel cylinder. Rear.

INSPECTION AFTER REMOVAL

Check for any deformity, cracks, or other damage on the wheel hub assembly, replace if necessary.

CAUTION:
The wheel hub assembly does not require maintenance. If any of the following symptoms are noted, replace the wheel hub assembly.
- Growling noise is emitted from the wheel hub bearing during operation.
- Wheel hub bearing drags or turns roughly.

INSTALLATION

Installation is in the reverse order of removal.