Control Valve Lower Body

REPAIR FOR COMPONENT PARTS

Control Valve Lower Body


COMPONENTS












DISASSEMBLY






Remove valves at retainer plate.
For removal procedures, refer to "Control Valve Upper
Body".

INSPECTION

Valve Springs





- Check each valve spring for damage or deformation. Also measure free length and outer diameter. Control Valve.
- Replace valve springs if deformed or fatigued.
Control Valves
Check sliding surfaces of control valves, sleeves and plugs for damage. Replace if necessary.

ASSEMBLY


CAUTION:





- Apply ATF to all components before installation.
- Lay control valve body down when installing valves. Do not stand control valve body upright.





Install control valves.
For installation procedures, refer to "Control Valve Upper Body".
Retainer Plate (Control Valve Lower Body)
Install proper retainer plates.
Unit: mm (in)