A/T Fluid

A/T FLUID

Changing A/T Fluid

1.Warm up A/T fluid.
2.Stop engine.
3.Drain A/T fluid by removing the drain plug. Reinstall the drain plug to the specified torque.

CAUTION:
Do not reuse drain plug gasket.

Drain plug:Component.

4.Refill the transaxle with new specified A/T fluid through the A/T fluid charging pipe. Always refill the transaxle with the same volume of A/T fluid that was drained out.
5.Run engine at idle speed for 5 minutes.
6.Check A/T fluid level and condition. Checking.