Changing M/T Oil

M/T OIL

Changing M/T Oil


DRAINING

1.Start engine and let it run to warm up transaxle.





2.Stop engine. Remove drain plug (1) and drain oil.
3.Install a new gasket onto drain plug (1) and install it into transaxle. Tighten drain plug to specification. Transmission Assembly.

CAUTION:
Do not reuse gasket.

FILLING






1.Remove filler plug (1). Fill with new oil until oil level reaches the specified limit at filler plug hole as shown.
Oil grade and capacity : Fluids and Lubricants

2.After refilling oil, check oil level. Install a new gasket on filler plug (1), then install it into transaxle. Tighten filler plug to specification. Transmission Assembly.

CAUTION:
Do not reuse gasket.