Front Power Window Motor RH Circuit Inspection

POWER WINDOW SYSTEM

Front Power Window Motor RH Circuit Inspection


1. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL






1.Turn ignition switch OFF.
2.Disconnect front power window motor RH.
3.Turn ignition switch ON.
4.Check voltage between front power window motor RH connector and ground.





OK or NG
OK- Replace front power window motor RH.
NG- GO TO 2.

2. CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT






1.Turn ignition switch OFF.
2.Disconnect power window and door lock/unlock switch RH.
3.Check continuity between rear power window switch RH connector D105 terminals 6, 7 and rear power window motor RH
connector D104 terminals 1, 2.
6 - 1: Continuity should exist.
7 - 2: Continuity should exist.

4.Check continuity between power window and door lock/unlock switch RH connector D105 terminals 6, 7 and ground.
6 - Ground: Continuity should not exist.
7 - Ground: Continuity should not exist.
OK or NG
OK- GO TO 3.
NG- Repair or replace harness.

3. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH






1.Check continuity between power window and door lock/unlock switch RH terminals.





OK or NG
OK- GO TO 4.
NG- Replace power window and door lock/unlock switch RH. Service and Repair .

4. CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH CIRCUIT






1.Disconnect main power window and door lock/unlock switch.
2.Check continuity between main power window and door lock/
unlock switch connector (A) and power window and door lock/
unlock switch RH connector (B).





3.Check continuity power window main switch connector (A) and ground.





OK or NG
OK- Replace main power window and door lock/unlock switch. Service and Repair .
NG- Repair or replace harness.