C1144

C1144 INCOMPLETE STEERING ANGLE SENSOR ADJUSTMENT

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch ON.
2.Perform self diagnostic result.
Is DTC C1144 detected?
YES- Proceed to diagnosis procedure. .
NO- Inspection End.


Diagnosis Procedure


1. ADJUST THE NEUTRAL POSITION OF STEERING ANGLE SENSOR

Perform neutral position adjustment of steering angle sensor. Work Procedure.
- GO TO 2.

2. CHECK SELF DIAGNOSTIC RESULT

With CONSULT.
Perform self diagnostic result.
Is DTC C1144 detected?
YES- GO TO 3.
NO- Inspection End.

3. CHECK STEERING ANGLE SENSOR SYSTEM

Check steering angle sensor system. C1143.
Is the inspection result normal?
YES- Replace ABS actuator and electric unit (control unit). Removal And Installation.
NO- Repair or replace malfunctioning components.