Removal And Installation

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL

1.Remove trunk lid finisher. .
2.Disconnect license plate lamp harness connector. .
3.Remove harness clips from trunk lid assembly, and then pull out harness from trunk lid assembly.
4.Remove the trunk lid hinge bolts on trunk lid side and remove the trunk lid assembly.

CAUTION:
Use two people when removing or installing trunk lid, due to its heavy weight.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Perform trunk lid adjustment procedure. Adjustments.
- Check trunk lid open/close, lock/unlock operation after installation.
- Apply touch-up paint (the body color) to the heads of the trunk lid hinge bolts.