Removal And Installation

FRONT FENDER

FRONT FENDER : Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL

1.Remove fender protector. .
2.Remove front bumper fascia and bumper side bracket. .
3.Remove front combination lamp. .
4.Remove front door corner finisher. .
5.Remove front fender cover. .
6.Remove front fender bolts from front fender.





7.Remove front fender stiffener (2) while carefully pulling upper portion of front fender (1) away from body.
: Vehicle front
8.Remove front fender.

CAUTION:
A viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Adjust the following components as necessary.
- Hood assembly: Adjustments.
- Front door: Adjustments.
- After adjusting, apply touch-up paint (the body color) to the head of the front fender bolts.