Trunk / Liftgate Lock: Service and Repair

TRUNK LID LOCK

TRUNK LID LOCK : Removal and Installation


REMOVAL

1.Remove trunk lid finisher. .





2.Disengage rod holder (1) by lifting upward, and then separate trunk lid lock rod (3) from trunk lid lock assembly (2).
3.Remove trunk lid lock assembly bolts.





4.Disconnect connector and then remove trunk lid lock assembly (1).

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Check trunk lid open/close, lock/unlock operation after installation.





- Check trunk lid lock assembly for poor lubrication. Apply body grease to trunk lid lock if necessary.