Parts Requiring Angle Tightening

PRECAUTIONS

Parts Requiring Angle Tightening

- For the final tightening of the following engine parts use Tool:
Tool number: KV-10112100 (BT-8653-A)
- Camshaft sprocket (INT) bolt
- Cylinder head bolts
- Main bearing cap bolts
- Connecting rod cap bolts
- Crankshaft pulley bolt (Note an angle wrench is required as bolt flange is provided with notches for angle tightening)
- Do not use a torque value for final tightening.
- The torque value for these parts are for a preliminary step.
- Ensure thread and seat surfaces are clean and coated with engine oil.