Aiming Adjustment Procedure

FRONT FOG LAMP AIMING ADJUSTMENT

Aiming Adjustment Procedure

1.Screen placement.
NOTE:
- Place the screen perpendicular to the level road.
- Position the vehicle facing the screen with 10 m (32.8 ft) between the front fog lamp center and the screen.
2.Start the engine. Illuminate the front fog lamp.

CAUTION:
Never cover the lens surface with a tape etc. because it is made of plastic.
3.Adjust the cutoff line height (A) with the aiming adjustment screw so that the distance (X) between the horizontal center line of front fog lamp (H) and (A) becomes 200 mm (7.87 in).
Front fog lamp light distribution on the screen





- A :Cutoff line
- B :High illuminance
- H :Horizontal center line of front fog lamp
- V :Vertical center line of front fog lamp
- X :Cutoff line height