Aiming Adjustment

HEADLAMP AIMING ADJUSTMENT

Aiming Adjustment


Aiming Adjustment procedure

1.Position the screen.
NOTE:
- Stop the vehicle facing the screen.
- Set the screen so that it is perpendicular to the road.
2.Make the distance between the headlamp center and the screen 7.62 m (25 ft).
3.Start the engine and illuminate the headlamp (LO).

CAUTION:
Do not cover the lens surface with tape, etc. because it is made of plastic.
NOTE:
Block the light from the headlamp that is not being adjusted with a thick fabric or similar object, so that it does not reach the adjustment screen.
4.Use the adjustment screw to adjust the low beams on the screen, so that it is within the aiming adjustment area.