Removal And Installation

MAP LAMP

Removal and Installation


WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.
To prevent damage to the bulb, never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it.

REMOVAL






1.Disengage lens pawls with a suitable tool (A), and then remove lens.

CAUTION:
Apply protect tape (B) on suitable tool (A).










2.Disengage map lamp housing pawl with a suitable tool (A).

CAUTION:
Apply protect tape (B) on suitable tool (A).





3.Disconnect map lamp harness connector, and then remove map lamp housing.

INSTALLATION

Installation is in the reverse order of removal.