Removal And Installation

ROOM LAMP

Removal and Installation


WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.

CAUTION:
- To prevent damage to the bulb, never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it.

REMOVAL






1.Disengage lens pawls with a suitable tool (A), and then remove lens.

CAUTION:
Apply protect tape (B) on suitable tool (A).










2.Disengage room lamp housing pawl with a suitable tool (A).

CAUTION:
Apply protect tape (B) on suitable tool (A).





3.Disconnect room lamp harness connector, and then remove room lamp housing.

INSTALLATION

Installation is in the reverse order of removal.