Removal And Installation

TRUNK ROOM LAMP

Removal and Installation


WARNING:
To prevent burns, never touch the glass surface of the bulb with bare hands because the surface is very hot just after the lamp is turned OFF.

CAUTION:
- To prevent damage to the bulb, never touch the glass surface of the bulb with bare hands or allow oil or grease to get on it.
- Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (causing dirt S or clouding). Always prepare a new bulb and have it on hand when replacing the bulb.

REMOVAL






1.Release the trunk room lamp pawl to open lens.





2.Remove the bulb.





3.Release trunk room lamp pawl with a suitable tool (A)





4.Disconnect harness connector, and then remove trunk room lamp.

INSTALLATION

Installation is in the reverse order of removal.