Charging System Preliminary Inspection

CHARGING SYSTEM PRELIMINARY INSPECTION

Inspection Procedure

Regarding Wiring Diagram information, Electrical Diagrams.

1. CHECK BATTERY TERMINALS CONNECTION

Check if battery terminals are clean and tight.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair battery terminals connection.

2. CHECK FUSE

Check for blown fuse and fusible link.





Is the inspection result normal?
YES- GO TO 3.
NO- Be sure to eliminate the cause of malfunction before installing new fuse.

3. CHECK GENERATOR GROUND TERMINAL CONNECTION

Verify connector F4 terminal 5 (generator ground harness) is clean and tight.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair connection.

4. CHECK DRIVE BELT TENSION

Check drive belt tension. Inspection.
Is the inspection result normal?
YES- Inspection end.
NO- Repair as needed.