Removal And Installation

POSITION SWITCH

Removal and Installation


REMOVAL

1.Drain gear oil. Draining.





2.Disconnect position switch connector (A).
3.Remove position switch from transaxle case.

INSTALLATION

1.Apply recommended sealant to threads of position switch.
-Use Genuine Silicone RTV or equivalent. Recommended Chemical Products And Sealants.

CAUTION:
Remove old sealant and oil adhering to threads.
2.Install position switch to transaxle case.
3.Tighten position switch to the specified torque. Exploded View.
4.Refill gear oil. Refilling.