Inspection

INPUT SHAFT AND GEAR

Inspection


INSPECTION AFTER DISASSEMBLY

Input Shaft and Gear





Check the following items and replace if necessary.
- Damage, peeling, uneven wear, and distortion of shaft.
- Excessive wear, damage, and peeling of gear.
Synchronizer





Check for the following and replace if necessary.
- Contact surface breakage, damage, and unusual wear of coupling sleeve, synchronizer hub, and synchronizer lever.
- Coupling sleeve and synchronizer hub move smoothly.





- Breakage, damage, and excessive wear of baulk ring cam surface and synchronizer lever contact surface.
Bearing





Check bearing for damage and rough rotation. Replace if necessary.