MOD

U1010 CONTROL UNIT (CAN)

Description

CAN controller controls the communication of CAN communication signal and ITS communication signal, and the error detection.


DTC Logic


DTC DETECTION LOGIC








Diagnosis Procedure


1. PERFORM DTC CONFIRMATION PROCEDURE

1.Turn the MAIN switch of ITS system ON.
2.Perform "All DTC Reading" with CONSULT.
3.Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "AVM".
Is "U1010" detected as the current malfunction?
YES- Replace the ITS control unit. Refer to "Removal and Installation ITS Control Unit" Removal And Installation - ITS Control Unit.
NO- Inspection End.