Without Navigation

MICROPHONE SIGNAL CIRCUIT

Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Without Navigation.

1. CHECK MICROPHONE SIGNAL CIRCUIT CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect AV control unit connector M97 and microphone connector R7.
3.Check continuity between AV control unit connector M97 and microphone connector R7.





4.Check continuity between AV control unit connector M97 and ground.





Is inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness or connectors.

2. CHECK MICROPHONE VCC VOLTAGE

1.Connect AV control unit connector M97.
2.Turn ignition switch ON.
3.Check voltage between terminals of AV control unit connector M97.





Is the inspection result normal?
YES- GO TO 3.
NO- Replace AV control unit. Refer to "Removal and Installation" Without Navigation.

3. CHECK MICROPHONE SIGNAL

1.Connect microphone connector.
2.Check signal between terminals of AV control unit connector M97.





Is the inspection result normal?
YES- Replace AV control unit. Refer to "Removal and Installation" Without Navigation.
NO- Replace microphone. Refer to "Removal and Installation" Without Navigation.