ITS CONTROL UNIT

ADDITIONAL SERVICE WHEN REPLACING REAR VIEW CAMERA

Work Procedure


1. CAMERA AIMING ADJUSTMENT

Perform the camera aiming adjustment with CONSULT. Refer to "Description" ITS CONTROL UNIT.
- GO TO 2.

2. PERFORM SELF-DIAGNOSIS

Perform the self-diagnosis of rear view camera with CONSULT. Check if any DTC is detected.
Is any DTC detected?
YES- Perform the trouble diagnosis for the detected DTC. Refer to "DTC Index" Testing and Inspection.
NO- GO TO 3.

3. LDW/BSW SYSTEM ACTION TEST

1.Perform the LDW/BSW system action test. Refer to "Description" ITS CONTROL UNIT.
2.Check that the LDW/BSW system operates normally.
Is the inspection result normal?
YES- Inspection End.
NO- GO TO 4.

4. LDW/BSW ACTIVE TEST

1.Perform WASH ACTIVE on Active Test using CONSULT.
2.Perform air and washer tube connection check by AIR & WASH ACTIVE on Active Test:
(1) Washer fluid output count on the rear view camera is 3 to 5 times --> OK
(2) Washer fluid output count on the rear view camera is 10 times --> Check tube with yellow marking
(3) Washer fluid output count on the rear view camera is 1 time --> Check tube with green marking
(4) No washer fluid output --> Check tube with blue marking or check valve
- Inspection End.