MOD System Does Not Activate

MOD SYSTEM DOES NOT ACTIVATE

Description

- When the Moving Object Detection system setting is ON, the Moving Object Detection ON indicator does not illuminate even if the warning system switch is depressed.
- The Moving Object Detection ON indicator does not turn off even if the warning system switch is pressed when the Moving Object Detection ON indicator illuminates.


Diagnosis Procedure


1. CHECK MOVING OBJECT DETECTION SYSTEM SETTING

1.Start the engine.
2.After starting the engine wait for 5 seconds or more.
3.Check that Moving Object Detection system setting on the navigation screen is ON.
Is Moving Object Detection system setting ON?
YES- GO TO 2.
NO- Enable the Moving Object Detection system setting.

2. MOD SWITCH INSPECTION

1.Start the engine.
2.Check that "mod SW" operates normally in "DATA MONITOR" of "AVM" with CONSULT.
Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 5.

3. CHECK MOVING OBJECT DETECTION ON INDICATOR CIRCUIT

1.Start the engine.
2.Select the active test item "MOD ON IND" of "AVM" with CONSULT.
3.Check if the Moving Object Detection ON indicator illuminates when the test item is operated.
Is the inspection result normal?
YES- GO TO 6.
NO- GO TO 4.

4. PERFORM THE SELF-DIAGNOSIS OF COMBINATION METER

1.Perform "All DTC Reading" with CONSULT.
2.Check if the DTC is detected in self-diagnosis results of "METER/M&A". Refer to "DTC Index" Testing and Inspection.
Is the inspection result normal?
YES- GO TO 5.
NO- GO TO 6.

5. PERFORM THE SELF-DIAGNOSIS

1.Perform "All DTC Reading" with CONSULT.
2.Check if the DTC is detected in self-diagnosis results of "AVM". Refer to "DTC Index" Testing and Inspection.
Is any DTC detected?
YES- GO TO 6.
NO- GO TO 7.

6. REPAIR OR REPLACE MALFUNCTIONING PARTS.

Repair or replace malfunctioning parts.
- GO TO 7.

7. CHECK MOVING OBJECT DETECTION SYSTEM

1.Erase "self-diagnosis result", and then perform "All DTC Reading" again after performing the action test.
(Refer to "Description" MOD for action test.)
2.Check that the Moving Object Detection system is normal.
- Inspection End.