Trunk / Liftgate: Adjustments

TRUNK LID

TRUNK LID ASSEMBLY : Adjustment











Check the clearance and the surface height between hood and each part by visual inspection and tactile feel.
If the clearance and the surface height are out of specification, adjust them according to the adjustment procedures.
Unit: mm (in)






LONGITUDINAL CLEARANCE

Trunk Lid Removed From Hinge
1.Loosen the trunk lid to hinge bolts.
2.Move the trunk lid so that the clearance measurements are within specifications provided.
3.Tighten the trunk lid to hinge bolts.
Trunk Lid Hinge Removed From Vehicle
1.Remove the rear parcel shelf trim. Refer to "Removal and Installation" Removal And Installation.
2.Loosen the hinge to parcel shelf bolts.
3.Move the trunk lid so that the clearance measurements are within specifications provided.
4.Tighten the hinge to parcel shelf bolts.
5.Install the rear parcel shelf trim. Refer to "Removal and Installation" Removal And Installation.

SURFACE HEIGHT ADJUSTMENT

1.Loosen the bumper rubber.
2.Loosen the striker bolts.
3.Lift up the trunk lid approx. 100 - 150 mm (3.94 - 5.91 in) height then close it lightly. Make sure it engages firmly with the trunk lid closed.
4.Tighten the trunk lid striker.